Enable Pim Snooping - Extreme Networks ExtremeWare Command Reference Manual

IP Multicast Commands

enable pim snooping

enable pim snooping {vlan <vlan name>}
Description
Enables PIM snooping for a selected VLAN.
Syntax Description
vlan name
Default
Disabled.
Usage Guidelines
Use this command to enable PIM snooping for a selected VLAN. To enable PIM snooping on a single
VLAN, specify the VLAN name. If no VLAN name is specified, PIM snooping is enabled on all VLANs.
Example
The following command enables PIM snooping on the VLAN demo-pim:
enable pim snooping vlan demo-pim
History
This command was first available in ExtremeWare 7.3.0.
Platform Availability
This command is available on "i" series platforms only.
1998
Specifies the name of the VLAN on which to enable PIM snooping. If no VLAN
name is specified, PIM snooping is enabled on all VLANs.
ExtremeWare 7.5 Command Reference Guide