Show Sonet - Extreme Networks ExtremeWare Command Reference Manual

PoS Commands—BlackDiamond Switch Only

show sonet

show sonet {<portlist>} {detail}
Description
Displays SONET port status.
Syntax Description
portlist
detail
Default
By default, the command shows summarized status for the port(s).
Usage Guidelines
You can use the
portlist
You can also omit the
portlist
information can be obtained for the port(s) by specifying the detail parameter. Summary status includes
the following information for each port:
• Values of all port configuration parameters
• State of the port
• Identification of all currently active events
Example
The following command displays the SONET port status:
show sonet
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.5b20.
Platform Availability
This command is available on the BlackDiamond switch only.
2168
Specifies the port number(s).
Displays more detailed status information for the ports.
parameter to specify which SONET port(s) you want to display the status for.
parameter to obtain status for all SONET ports. More detailed status
ExtremeWare 7.5 Command Reference Guide