LLDP Commands
configure lldp ports vendor-specific dot1 port-vlan-ID
configure lldp ports [all | <portlist>] [advertise | no-advertise]
vendor-specific dot1 port-vlan-ID
Description
Configures LLDP ports to advertise or not advertise port vlan ID information to its neighbors. This
allows a VLAN bridge port to advertise the port VLAN identifier that will be associated with untagged
or priority-tagged frames. Since this is a vendor specific option, there may not be support for this from
the neighbor.
Syntax Description
all
portlist
advertise
no-advertise
Default
The default is not to advertise.
Usage Guidelines
N/A.
Example
The following command configures all ports to advertise port vlan ID information to
neighbors.
configure lldp ports all advertise vendor-specific dot1 port-vlan-ID
History
This command was first available in ExtremeWare 7.4.
Platform Availability
This command is available on all Extreme switches.
2344
Applies to all ports on the switch.
Specifies a list of switch ports in the form i:*, i:n, or i:n-i-m.
Specifies that information is to be sent to neighbors.
Specifies that information is not to be sent to neighbors.
ExtremeWare 7.5 Command Reference Guide