Show Accounting - Extreme Networks ExtremeWare Command Reference Manual

ARM Commands—BlackDiamond Switch Only

show accounting

show accounting {vlan <vlan name>}
Description
Displays accounting statistics for the specified VLAN. If no VLAN is specified, statistics for all VLANs
are displayed.
Syntax Description
vlan name Specifies a VLAN name.
Default
N/A.
Usage Guidelines
You can display the accounting statistics for a single VLAN or all VLANs by issuing the
show
command. The command lists the packet
accounting <vlan name> show accounting <vlan name>
and octet counts for each bin number per VLAN. Omitting the VLAN name displays the accounting
statistics for all the VLANs.
Example
The following command displays accounting statistics for the vlan1 VLAN:
show accounting vlan1
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
2080 ExtremeWare 7.5 Command Reference Guide