Configure Lldp Ports System-Name - Extreme Networks ExtremeWare Command Reference Manual

LLDP Commands

configure lldp ports system-name

configure lldp ports [all | <portlist>] [advertise | no-advertise]
system-name
Description
Configures LLDP ports to advertise or not to advertise its system name to its neighbors.
Syntax Description
all
portlist
advertise
no-advertise
Default
The default is not to advertise.
Usage Guidelines
N/A.
Example
The following command configures port 1:6 to advertise the system name to neighbors.
configure lldp ports
History
This command was first available in ExtremeWare 7.4.
Platform Availability
This command is available on all Extreme switches.
2342
Applies to all ports on the switch.
Specifies a list of switch ports in the form i:*, i:n, or i:n-i-m.
Specifies that information is to be sent to neighbors.
Specifies that information is not to be sent to neighbors.
1:4 - 1:8 no-advertise system-name
ExtremeWare 7.5 Command Reference Guide