Enable Rip Export Cost - Extreme Networks ExtremeWare Command Reference Manual

enable rip export cost

For "i" series switches:
enable rip export [direct | isis | isis-level-1 | isis-level-1-external |
isis-level-2 | isis-level-2-external | ospf | ospf-extern1 | ospf-extern2 |
ospf-inter | ospf-intra | static | vip] cost <number> {tag <number>}
For "e" series switches:
enable rip export [direct | ospf | ospf-extern1 | ospf-extern2 | ospf-inter
| ospf-intra | static] cost <number> {tag <number>}
Description
Enables RIP to redistribute routes from other routing functions.
Syntax Description
direct
isis
isis-level-1
isis-level-1-external
isis-level-2
isis-level-2-external
ospf
ospf-extern1
ospf-extern2
ospf-inter
ospf-intra
static
vip
cost <number>t
tag <number>
Default
Disabled.
ExtremeWare 7.5 Command Reference Guide
Specifies interface routes (only interfaces that have IP forwarding enabled are
exported).
Specifies IS-IS routes.
NOTE: This option is only available on "i" series switches.
Specifies IS-IS level 1 routes.
NOTE: This option is only available on "i" series switches.
Specifies IS-IS level 1 external routes.
NOTE: This option is only available on "i" series switches.
Specifies IS-IS level 2 routes.
NOTE: This option is only available on "i" series switches.
Specifies IS-IS level 2 external routes.
NOTE: This option is only available on "i" series switches.
Specifies all OSPF routes.
Specifies OSPF external route type 1.
Specifies OSPF external route type 2.
Specifies OSPF-inter area routes.
Specifies OSPF-intra area routes.
Specifies static routes.
Specifies VIP routes.
NOTE: This option is only available on "i" series switches.
Specifies the cost metric, from 0-15. If set to 0, RIP uses the route metric
obtained from the route origin.
Specifies a tag number.
enable rip export cost
1821