Configure Vlan Delete Elrp-Poll Ports - Extreme Networks ExtremeWare Command Reference Manual

configure vlan delete elrp-poll ports

configure vlan <vlan name> delete elrp-poll ports [<portlist> | all]
Description
Disables ELRP packet transmission on ports of an ESRP-enabled VLAN.
Syntax Description
vlan name
portlist
all
Default
All ports of an ESRP-enabled VLAN have ELRP transmission enabled.
Usage Guidelines
If you have host ports on an ESRP-enabled VLAN, you do not need to send ELRP packets to those
ports.
If you change your network configuration, and a port no longer connects to a master, slave, or
ESRP-aware switch, you can disable ELRP transmission on that port.
Example
The following command disables ELRP packet transmission for ports 3-5 on VLAN esrp1:
configure vlan esrp1 delete elrp-poll ports 3-5
History
This command was first available in ExtremeWare 6.2.2b134.
This command was not supported ExtremeWare 7.0.
This command is supported in ExtremeWare 7.1.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
Specifies an ESRP-enabled VLAN name.
Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
Specifies all ports in the VLAN.
configure vlan delete elrp-poll ports
1519