Configure Dvmrp Vlan Timer - Extreme Networks ExtremeWare Command Reference Manual

IP Multicast Commands

configure dvmrp vlan timer

configure dvmrp vlan <vlan name> timer <probe interval> <neighbor timeout>
Description
Configures DVMRP interface timers.
Syntax Description
vlan name
probe interval
neighbor timeout
Default
The probe interval default setting is 10 seconds. The neighbor timeout default setting is 35 seconds.
Usage Guidelines
Specify the following:
• probe interval—The amount of time that the system waits between transmitting DVMRP probe
messages. The range is 1 to 2,147,483,647 seconds (68 years). The default setting is 10 seconds.
• neighbor timeout—The amount of time before a DVMRP neighbor router is declared to be down.
The range is 1 to 2,147,483,647 seconds (68 years). The default setting is 35 seconds
(3.5 * probe interval).
Example
The following command configures the DVMRP timers:
configure dvmrp vlan accounting timer 3000 9000
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on the "i" series of switches only.
1944
Specifies a VLAN name.
Specifies the time in seconds between probe messages.
Specifies the time in seconds before a neighbor router is declared to be down.
ExtremeWare 7.5 Command Reference Guide