Enable Icmp Unreachables - Extreme Networks ExtremeWare Command Reference Manual

enable icmp unreachables

enable icmp unreachables
enable icmp unreachables {vlan <vlan name>}
Description
Enables the generation of ICMP unreachable messages on one or all VLANs.
Syntax Description
vlan name Specifies a VLAN name.
Default
Enabled
Usage Guidelines
None
Example
The following command enables the generation of ICMP unreachable messages on all VLANs:
enable icmp unreachables
History
This command was available in ExtremeWare 2.0.
This command was modified in an ExtremeWare IP Technology Services Release based on ExtremeWare
v6.1.8b12 to support MPLS modules.
This command was added to the "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide 1665