Configure Vlan Esrp Elrp-Master-Poll Disable - Extreme Networks ExtremeWare Command Reference Manual

ESRP Commands

configure vlan esrp elrp-master-poll disable

configure vlan <vlan name> esrp elrp-master-poll disable
Description
Disables the use of ELRP by ESRP in the master state.
Syntax Description
vlan name Specifies an ESRP-enabled VLAN name.
Default
Disabled.
Usage Guidelines
Use this command to disable the use of ELRP by ESRP in the master state. When you disable ELRP, the
ESRP master switch no longer transmits ELRP PDUs to detect network loops.
Example
The following command disables the use of ELRP in the master state on the ESRP-enabled VLAN
:
elrp1
configure vlan elrp1 esrp elrp-master poll disable
History
This command was first available in ExtremeWare 6.2.2b134.
This command was not supported in ExtremeWare 7.0.
This command is supported in ExtremeWare 7.1.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
1528 ExtremeWare 7.5 Command Reference Guide