Configure Ipxmaxhops - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

IPX Commands—"i" Series Platforms Only

configure ipxmaxhops

configure ipxmaxhops <number>

Configures the IPX maximum hop count when forwarding IPX packets.

Syntax Description

Specifies a hop count number.

The default setting is 16.

Usage Guidelines

Change the default number only if NetWare Link Services Protocol (NLSP) is running in the IPX

The following command configures a maximum IPX hop count of 24:

configure ipxmaxhops 24

This command was first available in ExtremeWare 4.0.

Platform Availability

This command is available on all "i" series platforms.

ExtremeWare 7.5 Command Reference Guide

Extremeware 7.5