Show Inline-Power Stats Slot - Extreme Networks ExtremeWare Command Reference Manual

Power Over Ethernet Commands—Summit 300 and 400-24p Switches and Alpine PoE Module

show inline-power stats slot

show inline-power stats slot <slotlist>
Description
Displays inline power statistics for the specified slots.
NOTE
This command is available only for the Alpine FM-32Pi PoE Module and the Summit 300-48 switch.
Syntax Description
slotlist Specifies one or more slots.
Default
N/A
Usage Guidelines
Use this command to produce a report that shows how many ports are faulted, powered, and waiting
for power for the selected slots.
Example
The following command displays inline power statistics information for slot 1:
show inline-power stats slot 1
Following is sample output from this command:
PoE firmware status: Operational
PoE firmware revision: 1.6
Connection Order: 3 15
Total ports powered: 1
Total ports waiting for power: 0
Total ports faulted: 0
Total ports disabled: 1
History
This command was first available in ExtremeWare 7.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available only on Alpine FM32-Pi PoE Modules and the Summit 300-48 switch.
2326 ExtremeWare 7.5 Command Reference Guide