Unconfigure Inline-Power Detection Ports - Extreme Networks ExtremeWare Command Reference Manual

Power Over Ethernet Commands—Summit 300 and 400-24p Switches and Alpine PoE Module

unconfigure inline-power detection ports

unconfigure inline-power detection ports <portlist>
Description
Resets the power detection scheme to the default for the specified ports.
NOTE
This command is available only for the Alpine FM-32Pi PoE Module and the Summit 300-48 switch.
Syntax Description
portlist Specifies one or more slots and ports. May be in the form 2:*, 2:5, 2:6-2:8.
Default
N/A
Usage Guidelines
This command resets the power detection scheme that was configured with the following command:
configure inline-power detection [auto | discovery-test-only] ports <portlist>
Example
The following command resets the power detection scheme to its default for port 1 on slot 1:
unconfig inline-power detection ports 1:1
History
This command was first available in ExtremeWare 7.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available only on Alpine FM32-Pi PoE Modules and the Summit 300-48 switch.
2328 ExtremeWare 7.5 Command Reference Guide