configure iparp max-pending-entries
configure iparp max-pending-entries
configure iparp max-pending-entries <number>
Description
Configures the maximum allowed incomplete IP ARP entries.
Syntax Description
number
Specifies a number of maximum IP ARP entries.
Default
256
Usage Guidelines
Range: 1 - 20480, but cannot be greater than the configured IP ARP max-entries value.
Example
The following command sets the maximum IP ARP entries to 500 entries:
configure iparp max-pending-entries 500
History
This command was first available in ExtremeWare 6.2.
This command was added to the "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
1603