Configure Stacking Requested-Slot - Extreme Networks ExtremeWare Command Reference Manual

Stacking Commands

configure stacking requested-slot

configure stacking requested-slot <slot number> [current-slot <slot
number>]
Description
Configures a request to the stack manager for a specific slot number in the stack.
Syntax Description
requested-slot <slot number>
current-slot <slot number>
Default
The current slot (switch).
Usage Guidelines
Use this command to request a particular slot number for a member the next time the member joins the
stack. If the slot number is unavailable, the stack manager can assign any available slot number.
Example
The following command requests a slot ID of 2 for the switch currently with the slot ID of 5:
configure stacking requested-slot 2 current-slot 5
History
This command was first available in ExtremeWare 7.4.
Platform Availability
This command is only available on the Summit 200, Summit 300-24, and Summit 400 switches.
1392
Specifies the desired slot ID the next time this member joins the stack.
Specifies the member's slot ID that is applicable for this request. If this option
is not given, the command applies to the member on which it is run.
ExtremeWare 7.5 Command Reference Guide