Unconfigure Inline-Power Reserved-Budget Ports - Extreme Networks ExtremeWare Command Reference Manual

unconfigure inline-power reserved-budget ports

unconfigure inline-power reserved-budget ports <portlist>
Description
Resets the reserved budget back to the default value.
NOTE
This command is available only for the Alpine FM-32Pi PoE Module and the Summit 300-48 switch.
Syntax Description
portlist Specifies one or more slots and ports. On a modular switch, can be a list of slots and ports. On a
stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 1:*, 1:5, 1:6-1:8.
Default
The default reserved budget value is 0 mW.
Usage Guidelines
This command resets to default the reserved power budget that was configured with one of the
following commands:
configure inline-power reserved budget <milliwatts> ports <portlist>
Example
The following command resets the reserved power budget to its default for port 3 on slot 1:
unconfig inline-power reserved-budget ports 1:3
History
This command was first available in ExtremeWare 7.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available only on Alpine FM32-Pi PoE Modules and the Summit 300-48 switch.
ExtremeWare 7.5 Command Reference Guide
unconfigure inline-power reserved-budget ports
2333