This Command Is Available On The Summit 300-48, Summit 300-24, Summit 400-24P And Alpine Switches.show Wireless Ports Interface Rf-Status - Extreme Networks ExtremeWare Command Reference Manual

Version 7.5
Hide thumbs Also See for ExtremeWare:
Table of Contents

Advertisement

This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.show wireless ports interface rf-status

This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine
show wireless ports interface rf-status
switches.
show wireless ports [<portlist> | all] interface [1 | 2] rf-status {detail}
Description
Displays data rates for the selected port and interface. If Dynamic Frequency Selection (DFS) is used,
the detail command output includes a list of channels on which interference is detected.
Syntax Description
portlist
Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the form 1,
2, 1:2, 3-5.
all
Specifies all active ports.
interface
Specifies an interface: 1 or 2.
detail
Specifies to display the information in detailed format.
Default
N/A
Usage Guidelines
Each wireless port on the Summit 300 contains two interfaces. Interface 1 supports 802.11a, and interface
2 supports 802.11b/g radio signals. The
allows you to display information about one of the two individual interfaces (1|2) on a port or ports.
Examples
The following example displays RF status of all active ports of the switch:
show wireless ports all interface 1 rf-status
Port
Intf
--------------------------------------------------------------
1:37
1
1:38
1
The following command shows detailed RF status. The output includes a list of channels recorded in
the no-occupancy list (NOL) due to RADAR interference for the DFS feature.
show wireless ports all interface 1 rf-status detail
Wireless Interface:
Beacon Interval:
Fragmentation Length:
ExtremeWare 7.5 Command Reference Guide
Tx Rate
54
54
15:1
Transmit Rate:
DTIM:
Preamble:
Long Retry:
Short Retry:
RTS Threshold:
show wireless port interface rf-status
Channel
Noise Floor
64
85
64
84
54
40
2
Short
7
4
2345
2330
command
1377

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware 7.5

Table of Contents