Clear Igmp Group - Extreme Networks ExtremeWare Command Reference Manual

IP Multicast Commands

clear igmp group

clear igmp group {vlan <vlan name>}
Description
Removes one or all IGMP groups.
Syntax Description
vlan name Specifies a VLAN name.
Default
N/A.
Usage Guidelines
This command can be used by network operations to manually remove IGMP group entries instantly. It
deletes the layer 3 IGMP group entries while leaving IGMP entries at layer 2 unaffected: that is, IGMP
snooping entries will still be present in the switch.
Example
The following command clears IGMP groups from VLAN accounting:
clear igmp group accounting
History
This command was available in ExtremeWare 2.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
1934 ExtremeWare 7.5 Command Reference Guide