IPX Commands—"i" Series Platforms Only
configure ipxroute delete
configure ipxroute delete [<dest_netid> | default] <next_hop_netid>
<next_hop_node_addr>
Description
Removes a static IPX route entry from the route table.
Syntax Description
dest_netid
Specifies the destination NetID.
next_hop_id
Specifies the NetID of the neighbor IPX network.
next_hop_node_addr
Specifies the node address of the next IPX router.
Default
N/A
Usage Guidelines
If you have defined default or static routes, those routes will remain in the configuration independent of
whether the VLAN or VLAN IP address that used them remains. You should manually delete these
routes if no VLAN IP address is capable of using them.
Example
The following command deletes a static IPX route entry to the IPX route table:
configure ipxroute delete default 0011 00:eb:2a:0b:1e:0a
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on all "i" series platforms.
2034
ExtremeWare 7.5 Command Reference Guide