Configure Lldp Transmit-Delay - Extreme Networks ExtremeWare Command Reference Manual

configure lldp transmit-delay

configure lldp transmit-delay { auto | <seconds>}
Description
Configures the delay time between successive frame transmissions initiated by a value change or status
change in any of the LLDP local systems Management Information Base (MIB). The
the formula, (0.25 * transmit-interval), to calculate the number of seconds.
Syntax Description
auto
seconds
Default
The default is 2 seconds.
Usage Guidelines
N/A.
Example
The following command configures the automatic delay between LLDP frame transmissions.
configure lldp transmit-delay auto
History
This command was first available in ExtremeWare 7.4.
Platform Availability
This command is available on all Extreme switches.
ExtremeWare 7.5 Command Reference Guide
Uses the formula, (0.25 * transmit-interval), to calculate the seconds. The
range is 1 - 8192.
Specifies the interval at which lldp notifications are sent. The range is 5 -
3600.
configure lldp transmit-delay
option uses
auto
2353