Unconfigure Pim - Extreme Networks ExtremeWare Command Reference Manual

unconfigure pim

unconfigure pim
unconfigure pim {vlan <vlan name>}
Description
Resets all PIM settings on one or all VLANs to their default values.
Syntax Description
vlan name Specifies a VLAN name.
Default
If no VLAN is specified, the configuration is reset for all PIM interfaces.
Usage Guidelines
None.
Example
The following command resets all PIM settings on the VLAN accounting:
unconfigure pim vlan accounting
History
This command was available in ExtremeWare 4.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide 2021