Configure Mcast-Queue-Mgmt - Extreme Networks ExtremeWare Command Reference Manual

configure mcast-queue-mgmt

configure mcast-queue-mgmt start-queue <0-7> end-queue <0-7>
Description
This command configures a range of queues per port for multicast queue management.
Syntax Description
0-7
Default
All queues (0-7)
Usage Guidelines
Use this command to configure more than a single queue for multicast stream forwarding. This feature
is useful in high bandwidth multicast stream video deployments, where multiple streams are
converging on a single egress port. By using multiple queues per port, the queues are load balanced.
Example
The following command configures eight queues per port for multicast queue management:
configure mcast-queue-mgmt start-queue 0 end-queue 7
History
This command was available in ExtremeWare 7.4.
Platform Availability
This command is available on the "i" series of switches only.
ExtremeWare 7.5 Command Reference Guide
Specifies the number of queues per port that are used in a round-robin based
system of load balancing muticast queues.
configure mcast-queue-mgmt
1959