Configure Lldp Ports Vendor-Specific Dot1 Protocol-Identity - Extreme Networks ExtremeWare Command Reference Manual

configure lldp ports vendor-specific dot1 protocol-identity

configure lldp ports [all | <portlist>] [advertise | no-advertise]
vendor-specific dot1 protocol-identity
Description
Configures LLDP ports to advertise or not advertise protocol identity information to its neighbors. This
allows an 802 LAN station to advertise the particular protocols that are accessible through the port.
Since this is a vendor specific option, there may not be support for this from the neighbor.
Syntax Description
all
portlist
advertise
no-advertise
Default
The default is not to advertise.
Usage Guidelines
N/A.
Example
The following command configures all ports to not advertise protocol-identity
information to neighbors.
configure lldp ports all no-advertise vendor-specific dot1 protocol-identity
History
This command was first available in ExtremeWare 7.4.
Platform Availability
This command is available on all Extreme switches.
ExtremeWare 7.5 Command Reference Guide
Applies to all ports on the switch.
Specifies a list of switch ports in the form i:*, i:n, or i:n-i-m.
Specifies that information is to be sent to neighbors.
Specifies that information is not to be sent to neighbors.
configure lldp ports vendor-specific dot1 protocol-identity
2345