Extreme Networks ExtremeWare Command Reference Manual page 1475

The results for this command are as follows:
* Alpine3804:47 # show stpd Backbone_st
Stpd: Backbone_st Stp: ENABLED
Rapid Root Failover: Disabled
Operational Mode: 802.1W
802.1Q Tag: (none)
Ports:2:5,2:6,3:1,3:2,3:3,3:4,3:5,3:6,3:7,3:8,4:1,4:2
4:3,4:4
Active Vlans:
Bridge Priority: 32768
BridgeID:
Designated root:
RootPathCost: 0
MaxAge: 20s
CfgBrMaxAge: 20s
Topology Change Time: 35s
Topology Change Detected: FALSE
Number of Topology Changes: 0
Time Since Last Topology Change: 5192295s
The following command displays STPD settings on an STPD named Backbone_st in a Summit 200 switch:
show stpd backbone_st
The results for this command are as follows:
* Summit200:47 # show stpd Backbone_st
Stpd: Backbone_st Stp: ENABLED
Rapid Root Failover: Disabled
Operational Mode: 802.1W
802.1Q Tag: (none)
Ports:2:5,2:6,3:1,3:2,3:3,3:4,3:5,3:6,3:7,3:8,4:1,4:2
4:3,4:4
Active Vlans:
Bridge Priority: 32768
BridgeID:
Designated root:
RootPathCost: 0
MaxAge: 20s
CfgBrMaxAge: 20s
Topology Change Time: 35s
Topology Change Detected: FALSE
Number of Topology Changes: 1
Time Since Last Topology Change: 134s
History
This command was first available in ExtremeWare 2.0.
Support for the
Support for displaying RSTP data was introduced in ExtremeWare 7.1.
This command was added to the Summit "e" series of switches in ExtremeWare 6.2a and ExtremeWare
7.1e.
ExtremeWare 7.5 Command Reference Guide
Default
80:00:00:01:30:23:c1:00
80:00:00:01:30:23:c1:00
Root Port: ----
HelloTime: 2s
CfgBrHelloTime: 2s
Default
80:00:00:01:30:23:c1:00
80:00:00:01:30:23:c1:00
Root Port: ----
HelloTime: 2s
CfgBrHelloTime: 2s
keyword was introduced in ExtremeWare 6.2.
detail
Number of Ports: 0
ForwardDelay: 15s
CfgBrForwardDelay: 15s
Hold time: 1s
Topology Change: FALSE
Number of Ports: 14
ForwardDelay: 15s
CfgBrForwardDelay: 15s
Hold time: 1s
Topology Change: FALSE
show stpd
1475