Extreme Networks ExtremeWare Command Reference Manual page 2286

Power Over Ethernet Commands—Summit 300 and 400-24p Switches and Alpine PoE Module
conjunction with the violation precedence and has no effect if either or is
none advertised-class
selected for violation precedence using the following command:
configure inline-power violation-precedence [advertised-class | operator-limit |
max-class-operator | none] ports <portlist>
Example
The following command sets the limit to 10000 mW on ports 3 – 6 of slot 5:
config inline-power operator-limit 10000 ports 5:3-5:6
History
This command was first available in ExtremeWare 7.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available on Alpine FM32-Pi PoE Modules, the Summit 300 series switches, and the
Summit 400-24p switch.
2286 ExtremeWare 7.5 Command Reference Guide