Configure Stacking Slot-Binding - Extreme Networks ExtremeWare Command Reference Manual

configure stacking slot-binding

configure stacking slot-binding <slot number> <mac addr> module <switch
model> [priority <number>]
Description
Configures the current slot number to MAC address binding of the switches in the stack.
Syntax Description
slot number
mac addr
switch model
priority <number>
Default
NA
Usage Guidelines
Use this command to ensure proper binding of the MAC address to a slot ID when the configuration is
being uploaded to a TFTP server for reuse. When the configuration is downloaded from the TFTP
server, the stack manager can update the MAC address binding for the members and properly assign
the slot numbers and restore the stack.
This command can also be helpful for pre-staging, where multiple stacks exist that have identical
configurations. In this case, the uploaded configuration can be modified with the proper MAC-address
for the specific stack and downloaded.
Example
The following example binds MAC address
configure stacking slot-binding 3 00:04:96:1F:88:21 module s300-24
History
This command was first available in ExtremeWare 7.4.
Platform Availability
This command is only available on the Summit 200, Summit 300-24, and Summit 400 switches.
ExtremeWare 7.5 Command Reference Guide
Specifies to bind the switch with this slot ID to the MAC address.
Specifies the member's MAC address being bound to the slot.
Specifies the Summit model number for the member. Valid entries are:
S200-24, S200-48, S300-24, S400-24t, S400-24p, S400-48t.
(Optional) Specifies the current priority of the slot.
00:04:96:1F:88:21
configure stacking slot-binding
to slot 3, a Summit 300-24:
1393