Enable Eaps - Extreme Networks ExtremeWare Command Reference Manual

enable eaps

enable eaps
enable eaps {<name>}
Description
Enables the EAPS function for a named domain or for an entire switch.
Syntax Description
name Specifies the name of an EAPS domain.
Default
Disabled.
Default command enables for the entire switch.
Usage Guidelines
EDP must be enabled on the switch and EAPS ring ports.
EAPS must be enabled on the switch before you can enable it for a domain. If you enable EAPS on the
switch after you've created and configured domains, you must still enable the domains individually.
Example
The following command enables the EAPS function for entire switch:
enable eaps
The following command disables the EAPS function for the domain "eaps-1":
enable eaps eaps-1
History
This command was first available in ExtremeWare 6.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide 1423