Extreme Networks ExtremeWare Command Reference Manual page 1822

IGP Commands
Usage Guidelines
This command enables the exporting of static, direct, IS-IS, and OSPF-learned routes into the RIP
domain. You can choose which types of OSPF or IS-IS routes are injected, or you can simply choose
or , which will inject all learned OSPF or IS-IS routes regardless of type. (IS-IS is only
ospf isis
supported on the "i" series of switches.)
The cost metric is inserted for all RIP-learned, static, and direct routes injected into OSPF. If the cost
metric is set to 0, the cost is inserted from the route. The tag value is used only by special routing
applications. Use 0 if you do not have specific requirements for using a tag.
Example
The following command enables RIP to redistribute routes from all OSPF routes:
enable rip export ospf cost 0
History
This command was first available in ExtremeWare 4.0.
The keyword was changed to the keyword .
metric cost
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1822 ExtremeWare 7.5 Command Reference Guide