Configure Bgp Peer-Group Route-Reflector-Client - Extreme Networks ExtremeWare Command Reference Manual

configure bgp peer-group route-reflector-client

configure bgp peer-group <peer group> [route-reflector-client |
no-route-reflector-client]
Description
Configures all the peers in a peer group to be a route reflector client.
Syntax Description
peer group
route-reflector-client
no-route-reflector-client
Default
N/A.
Usage Guidelines
This command implicitly defines this router to be a route reflector.
The peer group must be in the same AS of this router.
Example
The following command configures the peer group outer as a route reflector client:
configure bgp peer-group outer route-reflector-client
History
This command was available in ExtremeWare 6.1.5.
Platform Availability
This command is available on "i" series of switches.
ExtremeWare 7.5 Command Reference Guide
Specifies a peer group.
Specifies that all the neighbors in the peer group be a route reflector client.
Specifies that all the neighbors in the peer group not be a route reflector
client.
configure bgp peer-group route-reflector-client
1887