Create Bgp Peer-Group - Extreme Networks ExtremeWare Command Reference Manual

BGP Commands—"i" Series Switches Only

create bgp peer-group

create bgp peer-group <name>
Description
Creates a new peer group.
Syntax Description
name Specifies a peer group.
Default
N/A.
Usage Guidelines
You can use BGP peer groups to group together up to 200 BGP neighbors. All neighbors within the peer
group inherit the parameters of the BGP peer group. The following mandatory parameters are shared
by all neighbors in a peer group:
• remote AS
• source-interface
• out-nlri-filter
• out-aspath-filter
• out-route-map
• send-community
• next-hop-self
Each BGP peer group is assigned a unique name when the peer group is created.
Example
The following command creates a new peer group named external:
create bgp peer-group outer
History
This command was available in ExtremeWare 6.1.5.
Platform Availability
This command is available on "i" series of switches.
1900 ExtremeWare 7.5 Command Reference Guide