Show Ppp - Extreme Networks ExtremeWare Command Reference Manual

show ppp

show ppp {<portlist>}
Description
Displays status information for PPP ports.
Syntax Description
portlist
Default
By default, the command shows summarized status for all PPP port(s).
Usage Guidelines
The
portlist
Alternatively, you can enter
Example
The following command displays status information for all PPP ports:
show ppp
History
This command was first available in ExtremeWare v6.1.5w2.01WAN technology release.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the Alpine 3800 series platform, when a WAN module is installed. A
similar command is available on the BlackDiamond switch.
ExtremeWare 7.5 Command Reference Guide
Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
parameter can be used to specify the port(s) for which status is to be shown.
with no parameters to obtain status for all PPP ports.
show ppp
show ppp
2227