Clear Iparp - Extreme Networks ExtremeWare Command Reference Manual

IP Unicast Commands

clear iparp

clear iparp {<ip address> | vlan <vlan name>}
Description
Removes dynamic entries in the IP ARP table.
Syntax Description
ip address Specifies an IP address.
vlan name Specifies a VLAN name.
Default
N/A
Usage Guidelines
Permanent IP ARP entries are not affected.
Example
The following command removes a dynamically created entry from the IPARP table:
clear iparp 10.1.1.5/24
History
This command was available in ExtremeWare 2.0.
This command was added to the "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1586 ExtremeWare 7.5 Command Reference Guide