Configure Ospf Area Interarea-Filter - Extreme Networks ExtremeWare Command Reference Manual

IGP Commands

configure ospf area interarea-filter

configure ospf area <area identifier> interarea-filter [<access profile> |
none]
Description
Configures a global inter-area filter policy.
Syntax Description
area identifier
access profile
none
Default
N/A.
Usage Guidelines
For switches configured to support multiple OSPF areas (an ABR function), an access profile can be
applied to an OSPF area that filters a set of OSPF inter-area routes from being sourced from any other
areas.
Example
The following command configures an inter-area filter policy from the access profile nosales:
configure ospf area 0.0.0.6 interarea-filter nosales
History
This command was first available in ExtremeWare 4.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1738
Specifies the OSPF target area.
Specifies an access profile.
Specifies not to apply an interarea filter.
ExtremeWare 7.5 Command Reference Guide