Configure Ipxsap Delete Vlan - Extreme Networks ExtremeWare Command Reference Manual

IPX Commands—"i" Series Platforms Only

configure ipxsap delete vlan

configure ipxsap delete vlan [<vlan name> | all]
Description
Disables IPX/SAP on an interface.
Syntax Description
vlan name Specifies a VLAN name.
all Specifies all VLANs.
Default
N/A
Usage Guidelines
If no VLAN is specified, all VLANs are configured to run IPX/SAP routing. IPX/SAP routing is enabled
by default when the IPX VLAN is configured.
Example
The following command disables IPX/SAP on the VLAN named accounting:
configure ipxsap delete vlan accounting
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on all "i" series platforms.
2036 ExtremeWare 7.5 Command Reference Guide