IPX Commands—"i" Series Platforms Only
disable ipxsap
disable ipxsap
Description
Disables IPX/SAP on the router.
Syntax Description
This command has no arguments or variables.
Default
N/A
Usage Guidelines
If no VLAN is specified, all VLANs are configured to run IPX/SAP routing. IPX/SAP routing is enabled
by default when the IPX VLAN is configured.
Example
The following disables IPX/SAP on the router:
disable ipxsap
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on all "i" series platforms.
2048
ExtremeWare 7.5 Command Reference Guide