Power Over Ethernet Commands—Summit 300 and 400-24p Switches and Alpine PoE Module
download firmware slot
download firmware slot <slot_number>
Description
Downloads firmware to the micro controller if the firmware needs to be upgraded.
NOTE
This command is available only for the Alpine FM-32Pi PoE Module.
Syntax Description
slot_number
Specifies the slot for which firmware will be downloaded to the micro controller.
Default
None
Usage Guidelines
This command downloads firmware to the micro controller if needed. A version of PoE firmware is
built into ExtremeWare just in case there is some corruption in the current firmware. A clean copy can
be retrieved. ExtremeWare will log a message in syslog prompting for a firmware upgrade. This
command is used to download the firmware. This command is available only if the board is present in
the slot. This same command will be used for any other products that have firmware built into
ExtremeWare.
Example
The following command downloads firmware to the micro controller for the board in slot 2:
download firmware slot 2
History
This command was first available in ExtremeWare 7.2.
Platform Availability
This command is available only on Alpine FM32-Pi PoE Modules.
2302
ExtremeWare 7.5 Command Reference Guide