Extreme Networks ExtremeWare Command Reference Manual page 1481

6 802.1D DISABLED
7 802.1D DISABLED
8 802.1D DISABLED
------------------------- Flags: ----------------------------
1:
2:
3: (Port role)
4: (Config type)
5: (Oper. type)
6:
7: (partner mode) d = 802.1d, w = 802.1w
8:
The following command displays the detailed spanning tree configurations for s0:
show stpd s0 ports detail
The results for this command are as follows:
* Summit400-48t:4 # show stpd s0 ports detail
Stpd: s0
Port Mode: 802.1D
Port State: FORWARDING
Port Priority: 16
Designated Root:
Designated Bridge: 00:00:00:00:00:00:00:00
Partner STP version: Dot1d
Stpd: s0
Port Mode: 802.1D
Port State: FORWARDING
Port Priority: 16
Designated Root:
Designated Bridge: 00:00:00:00:00:00:00:00
Partner STP version: Dot1d
* Summit400-48t:5 #
History
This command was first available in ExtremeWare 6.2.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
4 e------- 16
4 e------- 16
4 e------- 16
e=Enable, d=Disable
L = Loopback port
R=Root, D=Designated, A=Alternate, B=Backup
b=broadcast, p=point-to-point, e=edge, a=auto
b=broadcast, p=point-to-point, e=edge
p=proposing, a=agree
i = edgeport inconsistency
Port: 13 PortId: 400d
Topology Change Ack: FALSE
Loopback Port: FALSE
00:00:00:00:00:00:00:00
Port: 14 PortId: 400e
Topology Change Ack: FALSE
Loopback Port: FALSE
00:00:00:00:00:00:00:00
16390 00:00:00:00:00:00:00:00
16391 00:00:00:00:00:00:00:00
16392 00:00:00:00:00:00:00:00
Stp: ENABLED Path Cost: 4
Designated Cost: 0
Designated Port Id: 0
Stp: ENABLED Path Cost: 4
Designated Cost: 0
Designated Port Id: 0
show vlan stpd
1481