Configure Eaps Port - Extreme Networks ExtremeWare Command Reference Manual

configure eaps port

configure eaps <name> [primary | secondary] port <port number>
Description
Configures a node port as the primary or secondary port for the specified EAPS domain.
Syntax Description
name
primary
secondary
port number
Default
N/A.
Usage Guidelines
Each node on the ring connects through two ring ports. One port must be configured as the primary
port; the other must be configured as the secondary port.
Example
The following command adds port 1 of the module installed in slot 8 of a BlackDiamond switch to the
EAPS domain "eaps_1" as the primary port:
configure eaps eaps_1 primary port 8:1
History
This command was first available in ExtremeWare 6.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
Specifies the name of an EAPS domain.
Specifies that the port is to be configured as the primary port.
Specifies that the port is to be configured as the secondary port.
Specifies the port number.
configure eaps port
1415