Configure Inline-Power Budget - Extreme Networks ExtremeWare Command Reference Manual

Power Over Ethernet Commands—Summit 300 and 400-24p Switches and Alpine PoE Module

configure inline-power budget

configure inline-power budget <watts> slot <slot_number>
Description
Configures the amount of power available for inline-power on the slot.
NOTE
This command is available only for the Summit 300-48 switch.
Syntax Description
watts An integer specifying wattage in the range of 1 to 450 W.
slot_number Specifies the slot being configured for power.
Default
15.4 W
Usage Guidelines
Before issuing this command, disable the slot using the
command. The device is allowed to draw about 10% more power than the configured amount before
power is shut off to the device.
Example
The following example configures slot 1 at 10 watts.
disable inline-power slot 1
configure inline-power budget 10 slot 1
History
This command was first available in ExtremeWare 7.3e
Platform Availability
This command is available only on the Summit 300-48 switches.
2280
disable inline-power slots <slot_id>
ExtremeWare 7.5 Command Reference Guide