Configure Dvmrp Add Vlan - Extreme Networks ExtremeWare Command Reference Manual

IP Multicast Commands

configure dvmrp add vlan

configure dvmrp add vlan [<vlan name> | all]
Description
Enables DVMRP on one or all IP interfaces.
Syntax Description
vlan name
all
Default
Disabled.
Usage Guidelines
If is specified, DVMRP is enabled on all IP interfaces. When an IP interface is created, DVMRP is
all
disabled by default.
Example
The following command enables DVMRP on the VLAN accounting:
configure dvmrp add vlan accounting
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on the "i" series of switches only.
1938
Specifies a VLAN name.
Specifies all VLANs.
ExtremeWare 7.5 Command Reference Guide