Enable Wanqos - Extreme Networks ExtremeWare Command Reference Manual

enable wanqos

enable wanqos {ports <portlist> | multilink <groupname>}
Description
Enables WAN QoS for T1 and E1 ports.
Syntax Description
portlist
groupname
Default
WAN QoS is disabled by default.
Usage Guidelines
This command enables WAN QoS for T1 and E1 links. There is no equivalent command for T3 links.
When WAN QoS is enabled, egress traffic is sorted into eight software egress queues for each T1 or E1
port.
Example
The following command enables WAN QoS on ports 1:1 and 1:3:
enable wanqos ports 1:1,1:3
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on the Alpine 3800 series platform, when a WAN module is installed.
ExtremeWare 7.5 Command Reference Guide
A list of ports.
A multilink group name.
enable wanqos
2213