Show Lldp Neighbor - Extreme Networks ExtremeWare Command Reference Manual

LLDP Commands

show lldp neighbor

show lldp neighbor
Description
Displays LLDP neighbor information for all ports.
Syntax Description
N/A.
Default
N/A.
Usage Guidelines
N/A.
Example
The following example shows neighbor information for port 5:24, which is the only port enabled for
LLDP. Ports must be enabled for LLDP in order to show this information.
# show lldp neighbor
LLDP port 5:24
Neighbor:
Chassis ID (subtype 4): 00:04:96:1F:A4:06
Port ID (subtype 5): 23
TTL
Port Description
System Name
System Description
Thu
Feb 24 13:04:06 PST 2005
System Capabilities Supported:
Router
Bridge
System Capabilities Enabled:
Bridge
Management Address
Interface subtype: ifIndex
Interface Number : 1000006
Extended TLV Info 802.3 OUI (hex value) = 00-12-0f
-MAC PHY Configuration & Status
-Auto-negotiation Support & Status
-Advertised capability bits (hex value): 6c01
10baseT
10baseTFD
100baseTX
2362
Total neighbors = 1
: 120 seconds
:
: SummitX450-24t
: ExtremeWare X0S version 11.2.0.9 v1120b9 by release-manager on
: 10.210.51.3
: Supported, enabled
ExtremeWare 7.5 Command Reference Guide