Configure Application Examination Ports - Extreme Networks ExtremeWare Command Reference Manual

configure application examination ports

configure {application examination} <application name>
ports [<portlist> | all]
Description
Adds or deletes an existing application examination rule to or from the specified
Syntax Description
application name
add
delete
portlist
all
Default
None
Usage Guidelines
Up to 60 application examination rules can be associated with each port.
Example
The following command adds an application examination rule, TCP20, to ports 2:6 through 2-8:
configure application examination TCP20 add ports 2:6-2:8
The following command also adds an application examination rule to ports 2:6 through 2-8. The
keywords "application examination" are optional.
configure TCP20 add ports 2:6-2:8
History
This command was first available in ExtremeWare 7.2.
Platform Availability
This command is available on
ExtremeWare 7.5 Command Reference Guide
Specifies the name string associated with the rule to configure.
Specifies to add an application examination rule to the specified ports.
Specifies to delete an application examination rule from the specified ports.
Specifies one or more slots and ports. May be in the form 2:*, 2:5, 2:6-2:8.
"3"
Specifies all series ports.
"3"
series I/O modules only.
configure application examination ports
[add | delete]
"3" series ports.
2233