Configure Ospf Asbr-Filter - Extreme Networks ExtremeWare Command Reference Manual

IGP Commands

configure ospf asbr-filter

configure ospf asbr-filter [<access profile> | none]
Description
Configures a route filter for all OSPF exported routes.
Syntax Description
access profile
none
Default
N/A.
Usage Guidelines
For "i" series switches. For switches configured to support RIP, BGP, VIP, IS-IS, and static route
re-distribution into OSPF, an access profile can be used to limit the routes that are advertised into OSPF
for the switch as a whole.
For "e" series switches. For switches configured to support RIP and static route re-distribution into
OSPF, an access profile can be used to limit the routes that are advertised into OSPF for the switch as a
whole.
Example
The following command configures a route filter for all routes OSPF exports from RIP or other sources:
configure ospf asbr-filter subnet25-filter
History
This command was first available in ExtremeWare 4.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1742
Specifies an access profile.
Specifies not to apply an ASBR filter.
ExtremeWare 7.5 Command Reference Guide