Disable Diffserv Ingress Replacement Ports - Extreme Networks ExtremeWare Command Reference Manual

disable diffserv ingress replacement ports

disable diffserv ingress replacement [high-priority | low-priority |
low-and-high-priority] ports [<portlist> | all] {<Ingress QOS profile>}
Description
Disables the optional overwriting of the DiffServ code point portion of the (IP TOS) field for ingress
traffic.
Syntax Description
high-priority
low-priority
low-and-high-priority
portlist
all
Ingress QoS profile
Default
Disabled
Usage Guidelines
The "3" series I/O modules support eight ingress QoS profiles (IQP1 - IQP8).
You can disable replacement for high-priority, low-priority, or low- and high-priority traffic for all
ingress QoS profiles on the specified ports or a selected ingress QoS profile on the specified ports.
Example
The following command disables low-priority DiffServ replacement for all
QoS profiles:
disable diffserv ingress replacement low-priority ports all
History
This command was first available in ExtremeWare 7.1.
Platform Availability
This command is available on
ExtremeWare 7.5 Command Reference Guide
Specifies DiffServ replacement for high-priority traffic (traffic received below the
committed-rate configured for the Ingress QoS profile).
Specifies DiffServ replacement for low-priority traffic (traffic received above the
committed-rate configured for the Ingress QoS profile).
Specifies DiffServ replacement for both high-priority and low-priority traffic.
Specifies one or more slots and ports. May be in the form 2:*, 2:5, 2:6-2:8.
Specifies all "3" series ports.
Specifies an optional ingress QoS profile: IQP1 through IQP8.
"3"
series I/O modules only.
disable diffserv ingress replacement ports
"3" series ports in all ingress
2249