Restarting The Epicenter Server Components As Services; Running The Epicenter Server Software Under Solaris; Starting Or Restarting The Epicenter Server; Shutting Down The Epicenter Server Components - Extreme Networks EPICenter Software Installation Manual

Restarting the EPICenter Server Components as Services

If you have installed the EPICenter server components as services, follow these steps to restart them:
1 From the Start menu, open the Control Panel folder.
2 From the Control Panel, double-click Administrative Tools.
3 From the Administrative Tools folder, double-click Services. This displays the Services Properties
window. You must have Administrator privileges to access this function.
4 From the list of installed programs select EPICenter 4.1 Database Engine and click Start.
5 Repeat the same action for the EPICenter 4.1 Server
6 If you want to change the start-up parameters, click Properties... instead of Start.
For example, if you plan to import users from an NT Domain Controller through the Grouping
Manager, the EPICenter 4.1 server must be running with permissions that enable it to get user
information from the Domain Controller. If you do not have those permissions as you are currently
logged on, you can specify a different log on account for the EPICenter web server as a start-up
parameter:
— In the Log On As: section of the Startup... pop up window, enter the account name and password
for a user that has the appropriate permissions to access the Domain Controller.

Running the EPICenter Server Software under Solaris

The following instructions assume that you are using a command or Xterm window running the C
shell.

Starting or Restarting the EPICenter Server

To run the EPICenter Server:
1 Set the current directory:
cd <install_dir>
<install_dir>
installed in the default directory, the path is
2 Execute
runserv
runserv &

Shutting Down the EPICenter Server Components

To shut down the EPICenter Server:
1 Set the current directory:
cd <install_dir>
<install_dir>
installed in the default directory, the path is
2 Execute
stopserv
stopserv &
EPICenter Software Installation and User Guide
is the directory (path) where you installed the EPICenter components. If you
to start the two EPICenter components in the required order.
is the directory (path) where you installed the EPICenter components. If you
to shut down the EPICenter components in the required order.
Running the EPICenter Server Software under Solaris
.
/opt/extreme/epc4_1
.
/opt/extreme/epc4_1
71