Configure Wireless Bind - Extreme Networks ExtremeWare Command Reference Manual

Remote Connect Commands

configure wireless bind

configure wireless bind [ap-mac | ap-serial | ap-ipaddr]
Description
Indicates the method by which Altitude 300 APs will be identified to this Summit 300-48 Attachment
switch.
Syntax Description
ap-mac Specifies the MAC address as the binding method.
ap-serial Specifies the serial number as the binding method.
ap-ipaddr Specifies the IP address as the binding method.
Default
ap-mac
Usage Guidelines
N/A
Example
The following command specifies that MAC address will be used to identify A300s to the Discovery
switch.
configure wireless bind ap-mac
History
This command was first available in ExtremeWare 7.4.
Platform Availability
This command is available on the Summit 300-48 switch.
2086 ExtremeWare 7.5 Command Reference Guide