IGP Commands
show ospf area
show ospf area <area identifier>
Description
Displays information about a particular OSPF area.
Syntax Description
area identifier
Specifies an OSPF area.
Default
N/A.
Usage Guidelines
None.
Example
The following command displays information about OSPF area 1.2.3.4:
show ospf area 1.2.3.4
History
This command was available in ExtremeWare 2.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1830
ExtremeWare 7.5 Command Reference Guide