show wireless ports interface client-scan results
mac-address
show wireless ports [<portlist> | all] interface [1 | 2] client-scan
results <mac_address> {detail)
Description
Displays the details about the specified client MAC address.
Syntax Description
portlist
Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the form
1, 2, 1:2, 3-5.
all
Specifies all active ports.
interface
Specifies an interface: 1 or 2.
detail
Specifies to display the information in detailed format.
Default
N/A
Usage Guidelines
Use this command to check details about the clients in the client scan table.
Example
The following example shows the details of client MAC address 00:03:7F:BE:FE:9D.
show wireless port 5 interface 1 client-scan results 00:03:7F:BE:FE:9D
It produces output similar to the following:
Intf
Source
================================================================================
5:1
00:03:7F:BE:FE:9D 17
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
ExtremeWare 7.5 Command Reference Guide
Probe REQs
Last RSS Channel Last SeenClient
4
show wireless ports interface client-scan results mac-address
161
01:39:48
N
1367