Show Wireless Ports Interface Client-Scan Status - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

show wireless ports interface client-scan status

show wireless ports [<portlist> | all] interface [1 | 2] client-scan status
Description
Displays the overall operation of the client scan results.
Syntax Description
portlist Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the form
1, 2, 1:2, 3-5.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.
Default
N/A
Usage Guidelines
The output of this command displays the performance results for the following variables on a per
wireless interface basis:
Variable Description
CurrentTableSize The current size of the table (in entries)
TableWatermark The maximum size the table has been since the last reset of the historical statistics
TotalOverflows The number of times an entry has been overwritten because the table is full
TotalTimeouts The number of times an entry has been aged out from the table
LastElement The last time an element was added to the table
TotalProbes The total number of probes received on this interface
Examples
The following example displays the performance results for port 5 on interface 1:
show wireless ports 5 interface 1 client-scan status
It produces output similar to the following:
S300-24-FZ:28 # show wireless ports 1 interface 1 client-scan status
Intf Table-Size WaterMark Overflows Timeouts LastElement Total-Probes
-------------------------------------------------------------------------------
1:1 0
S300-24-FZ:29 #
1368
0 0 0 0 0
ExtremeWare 7.5 Command Reference Guide